E-lo-safe S - Mechanical Deposit Lock 79101

Without any approvals/certificates

Double-bitted renter lock, 8 levers, dead bolt

Overview

E-lo-safe S - Keys with Mauer bow
E-lo-safe S - Keys with Mauer bow

Electronically controlled safe deposit locks with dead bolt.

The E-lo-safe series offers a range of locks with different control features within the same basic design.

In the version 79101 the bank authorisation is effected electronically by the cable interface of the central control. The customer authorisation is effected at the safe-deposit box by a double-bitted lock.

Features

Approvals/Certificates
Without any approvals/certificates
Lock 
Double-bitted renter lock
8 levers, electrolytic galvanised steel
Opening with double-bitted key after electronic release
Renter key retained when in open position
Die-cast lock case and bolt, throw 12 mm
Control latch plastic, black
Weight approx. 450 g
Admissible mounting positions
Right hand lock, opening clockwise
Mounting position lock - Horizontal (bolt left) 

Technical Data

LockOrder number
E-lo-safe S - standard79101
OptionsOption code
Tamper switchAHK
Lock case and bolt surface treatedSRO
ConnectorMTA156
Lock functionOption code
Passive release control:
After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
Deposit box monitoring:
Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).
 
Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated 
InterfaceFunction elementSpecificationOperating time (OT) 
InputRelease solenoid360 Ohm, Umin=13 V DC13 V: 100% OT, 24 V: 48% OTFSK005
OutputKey/latch contactChange over contact, 50 mA, 30 V DC13 V: 100% OT, 24 V: 48% OTFSK005
Alternative operating voltage (resistance solenoid)Option code
InterfaceFunction elementSpecificationOperating time (OT) 
InputRelease solenoid148 Ohm, Umin=5 V DC6 V: 100% OT, 12 V: 87% OT,
24 V: 15% OT
OHM148
InputRelease solenoid563 Ohm, Umin=20 V DC24 V: 87% OTOHM563

Functionality

Lock function
Active release control:
After authorization at the central control a supply voltage is applied at the lock. The current feed of the release solenoid starts after the lock has been opened (key turned).
Deposit-box monitoring:
Using this concept it is possible to monitor the lock/deposit box (e.g. lock has been manipulated or box has been broken open).
Electronically controlled lock, cable 2 wires, usable length 211 mm, cable ends tin-plated
InterfaceFunction elementSpecificationOperating time (OT)
InputRelease solenoid360 Ohm, Umin=13 V DC13 V: 100% OT, 24 V: 48% OT
OutputKey/latch contactNormally closed, 50 mA, 30 V DC13 V: 100% OT, 24 V: 48% OT
Lock function
Passive release control:
After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
Deposit box monitoring:
Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).
Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated
InterfaceFunction elementSpecificationOperating time (OT)
InputRelease solenoid360 Ohm, Umin=13 V DC13 V: 100% OT, 24 V: 48% OT
OutputKey/latch contactChange over contact, 50 mA, 30 V DC13 V: 100% OT, 24 V: 48% OT

Keys

MaterialLength [mm]Usable length [mm]Key bowOption code
Renter double-bitted keys, nickel-plated 
Die-cast55.510MauerDSD056

Documents