E-lo-safe D - Mechanical Deposit Lock 79106

Without any approvals/certificates

Renter lock with turning knob, dead bolt

Overview

E-lo-safe D
E-lo-safe D

Electronically controlled safe deposit locks with dead bolt.

The E-lo-safe series offers a range of locks with different control features within the same basic design.

In the version 79106 the lock is operated by a turning knob. This version is mainly suitable for self-service stations where the complete release is authorised electronically.

Features

Approvals/Certificates
Without any approvals/certificates
Lock 
Renter lock with turning knob for self-service stations
Opening with turning knob after electronic release
Die-cast lock case and bolt, throw 12 mm
Control latch plastic, black
Weight approx. 450 g
Admissible mounting positions
Right hand lock, opening clockwise
Mounting position lock - Horizontal (bolt left) 

Technical Data

LockOrder number
E-lo-safe D - standard79106
OptionsOption code
Turning knob, for door thickness from 3-33 mmDKA
Turning knob, for door thickness from 34-54 mmDKC
Tamper switchAHK
Lock case and bolt surface treatedSRO
ConnectorMTA156
Lock functionOption code
Passive release control:
After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
Deposit box monitoring:
Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).
 
Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated 
InterfaceFunction elementSpecificationOperating time (OT) 
InputRelease solenoid360 Ohm, Umin=13 V DC13 V: 100% OT, 24 V: 48% OTFSK005
OutputKey/latch contactChange over contact, 50 mA, 30 V DC13 V: 100% OT, 24 V: 48% OTFSK005
Alternative operating voltage (resistance solenoid)Option code
InterfaceFunction elementSpecificationOperating time (OT) 
InputRelease solenoid148 Ohm, Umin=5 V DC6 V: 100% OT, 12 V: 87% OT,
24 V: 15% OT
OHM148
InputRelease solenoid563 Ohm, Umin=20 V DC24 V: 87% OTOHM563

Functionality

Lock function
Active release control:
After authorization at the central control a supply voltage is applied at the lock. The current feed of the release solenoid starts after the lock has been opened (key turned).
Deposit-box monitoring:
Using this concept it is possible to monitor the lock/deposit box (e.g. lock has been manipulated or box has been broken open).
Electronically controlled lock, cable 2 wires, usable length 211 mm, cable ends tin-plated
InterfaceFunction elementSpecificationOperating time (OT)
InputRelease solenoid360 Ohm, Umin=13 V DC13 V: 100% OT, 24 V: 48% OT
OutputKey/latch contactNormally closed, 50 mA, 30 V DC13 V: 100% OT, 24 V: 48% OT
Lock function
Passive release control:
After authorisation at the central control the current feed of the release solenoid starts immediately. After the lock has been opened (key turned) the current feed is interrupted.
Deposit box monitoring:
Using this concept only a limited monitoring of the deposit box is possible (e.g. box has been broken open).
Key/latch contact (separate line), cable 5 wires, usable length 200 mm, cable ends tin-plated
InterfaceFunction elementSpecificationOperating time (OT)
InputRelease solenoid360 Ohm, Umin=13 V DC13 V: 100% OT, 24 V: 48% OT
OutputKey/latch contactChange over contact, 50 mA, 30 V DC13 V: 100% OT, 24 V: 48% OT

Documents