Combi-Deposit - Mechanical Deposit Lock 81033

Without any approvals/certificates

3 combination knobs/6 levers, partly changeable lock, dead bolt, 3-way closure (opt.)

Overview

Combi-Deposit - Keys with square bow
Combi-Deposit - Keys with square bow

Partly changeable safe deposit lock with dead bolt.

Combination lock 17,600, key lock 46,7000 theoretical variations.

This safe deposit lock combines the features of a combination lock and a key lock. Only after a valid combination has been set using the three knobs, can the user open the lock with the key. The combination is changed via a slide unit at the back of the lock.

3-way closure is available as an option.

Features

Approvals/Certificates
Without any approvals/certificates
Lock 
Combination lock
- 3 die-cast knobs, nickel-plated, 26 setting marks (A-Z) each
- Set combination can be seen at back of lock
- Combination change via slide unit at back of the lock
Key lock
- 6 levers, electrolytic galvanised steel
- Key retained when in open position
Die-cast lock case and bolt, throw 11 mm
Suitable for doors from 7 to 15 mm
Weight approx. 1,150 g
Admissible mounting positions
Right hand lock, opening clockwise
Mounting position lock - Horizontal (bolt left) 

Technical Data

LockOrder number
Combi-Deposit - standard81033
OptionsOption code
Lock case and bolt surface treatedSRO
Lock with 3-way closureSDS
Bolt with 1 M6 threadRGW1x6
Bolt with 2 M4 threadsRGW2x4
Key guide projecting 2 mm, aluminium EV1 anodised, Ø 29.5 mm, rivetedSFA002
Key guide projecting 3.5 mm, aluminium EV1 anodised, Ø 29.5 mm, rivetedSFA3.5
Key guide projecting 8 mm, aluminium EV1 anodised, Ø 29.5 mm, rivetedSFA008
Admissible mounting position: lock vertical, right hand lock, opening clockwiseSBS
AccessoriesOrder number
Mounting plate 3 mm thick with 4 M6 threaded bushings, screws and securing rings3 118 000 380
- Optional with spot-welded manganese steel plate 1.5 mm thick

3 118 000 160
Mounting plate 3 mm thick, with 4 M6 threaded bushings, screws and securing rings
(only for use in conjunction with option SDS)
3 118 000 150
- Optional with spot-welded manganese drilling plate 1.5 mm thick
  (only for use in conjunction with option SDS)

3 118 000 370
Manganese steel plate 1.5 mm thick2 130 001 410

Keys

MaterialLength [mm]Usable length [mm]Key bowOption code
Keys, Double-bitted keys, nickel-platedKeys, Double-bitted keys, nickel-plated
Die-cast62.517.5SquareDSD063
Brass6015SquareDSM060

Documents